top of page
Search

3 and a half inch Newbury Tie Bar - Available Now - www.completeplastics.com

  • Heat Tech
  • 22 hours ago
  • 3 min read

770-418-417-6983 /When working with plastic injection molding machines, the right components make all the difference. One key part that often gets overlooked is the tie bar. For those using Newbury machines, the 3.5-inch Newbury tie bar is a crucial element that ensures stability and precision during molding. This post explores what machines use this tie bar, why it matters, and how you can get your hands on one today.


Close-up view of a 3.5-inch Newbury tie bar installed on an injection molding machine
3.5-inch Newbury tie bar mounted on injection molding machine

3 and a half inch Newbury Tie Bar


A tie bar is a long, cylindrical rod that holds the platens of an injection molding machine together. It maintains the structural integrity of the machine under high pressure during the molding process. The 3.5-inch Newbury tie bar refers to the diameter of the tie bar, which is 3.5 inches. This size is specific to certain Newbury injection molding machines and is essential for compatibility and performance.


3 and a half inch Newbury Tie Bar - The overall length (OAL) of this tie bar is approximately 110.12 inches, making it suitable for machines with specific frame sizes and platen spacing.


Which Plastic Injection Machines Use the 3.5-inch Newbury Tie Bar?


Not all injection molding machines use the same tie bar size. The 3.5-inch Newbury tie bar fits particular models and series within the Newbury lineup. Here are some examples:

Feed Screw
Buy Now


  • Newbury V3-80RS / V3-80BRS (80 Ton)

These machines are commonly listed with a 3.5-inch centerline tie bar specification. They are popular for medium-duty molding tasks and require tie bars that can handle moderate clamping forces.


  • Newbury 150-Ton Series (e.g., M6-6-150RS)

While these machines often have larger platen dimensions, some configurations within this series use tie bars with diameters and spacing that include 3.5-inch components. This depends on the specific stationary or moving platen assembly.


  • Custom and Heavy-Duty Newbury Vertical Series

These vertical machines often feature four tie-bar frames designed for high cavity counts and taller mold stacks. Some models within this series incorporate 3.5-inch tie bars to meet the demands of heavier molds and higher pressures.


Understanding which machine uses this tie bar helps in ordering the correct replacement or upgrade part, ensuring your machine runs smoothly without unexpected downtime.


Why the Right Tie Bar Size Matters


Choosing the correct tie bar size is not just about fitting the machine. It affects:


  • Machine Stability

The tie bar keeps the platens aligned and stable during injection. A smaller or larger diameter than specified can cause misalignment or excessive wear.


  • Mold Protection

Proper tie bar size helps distribute clamping force evenly, protecting molds from damage.


  • Machine Longevity

Using the right tie bar reduces stress on the machine frame, extending its operational life.


  • Safety

A correctly sized tie bar prevents mechanical failures that could lead to accidents.


How to Order a 3.5-inch Newbury Tie Bar


If you need a replacement or additional tie bar, www.completeplastics.com offers the 3.5-inch Newbury tie bar with an overall length of 110.12 inches. Here’s how to get in touch:


When ordering, provide your machine model and specifications to ensure you receive the correct part. The team at Complete Plastics can assist with any questions about compatibility or installation.


Installation Tips for Tie Bars


Installing a tie bar requires precision and care. Here are some practical tips:


  • Measure Twice, Order Once

Confirm the diameter and length of your existing tie bars before ordering replacements.


  • Inspect the Machine Frame

Check for any wear or damage on the platen and tie bar holes before installation.


  • Use Proper Tools

Tie bars are heavy and require the right lifting equipment and torque tools.


  • Follow Manufacturer Guidelines

Refer to Newbury’s service manuals for torque specifications and installation procedures.


  • Test After Installation

Run a test cycle to ensure the tie bar is properly seated and the machine operates smoothly.


Benefits of Buying from Complete Plastics


Complete Plastics specializes in supplying high-quality plastic injection machine parts, including Newbury tie bars. Benefits include:


  • Accurate Specifications

Parts meet exact OEM dimensions for reliable fit.


  • Fast Shipping

Minimizes machine downtime with quick delivery.


  • Expert Support

Knowledgeable staff help with part selection and technical questions.


  • Competitive Pricing

Quality parts at fair prices.


Summary


The 3.5-inch Newbury tie bar is a vital component for several Newbury injection molding machines, including the V3-80RS, 150-ton series, and some vertical models. Using the correct tie bar size ensures machine stability, mold protection, and safety. Complete Plastics offers this tie bar with precise specifications and expert support to keep your machines running efficiently.


If your Newbury machine requires a 3.5-inch tie bar, contact Complete Plastics today at sales@completeplastics.com or call 770-417-6983 to get the right part delivered quickly.


 
 
 
bottom of page